意甲ac米兰直播 www.vyikg.com 杭州真彩包装制品有限公司在处理印刷润滑主要有一下几种方式： (1)新机器经过磨合期后要及时换油，换油时(包括以后每次换
There are several ways for Hangzhou True Color Packaging Products Co., Ltd. to deal with printing lubrication: (1) After the running-in period, the new machine should change oil in time, including every change in the future.
油)要清洁油箱和齿轮，清除附着在上面的固体颗粒。在维修工作中尽可能保持润滑油的洁净，避免固体颗粒进入。(2)新油并不总是干净的，某些小的润滑油生产商和经销商在生产、灌装、存储、运输过程中不能严把质量关，极易造成新油中固体颗粒和水分含量超标。要选择正规的润滑油供应商，保证购入油品的质量，切不可图便宜，购买劣质油品。 (3)润滑油应在清洁的房间存放，存放时注意保持密封，避免固体颗粒和水进入。加油工具要专用并保持清洁，可以与润滑油放在同一房间。 (4)做好机器油箱的密封，避免空气中的灰尘和潮气进入。及时治理机器漏油，避免污染环境和浪费，注意不能只添油不换油。 (5)使用好的机油滤芯并及时更换。在滤芯上的投资可以从设备寿命上得到更大回报。
Oil) To clean the tank and gear, remove the solid particles attached to it. Keep the lubricating oil as clean as possible in the maintenance work and avoid solid particles entering. (2) New oil is not always clean. Some small lubricant producers and distributors can not strictly control the quality in the process of production, filling, storage and transportation. It is very easy to cause solid particles and moisture content in new oil to exceed the standard. To select a regular lubricant supplier and ensure the quality of the oil purchased, it is absolutely impossible to purchase inferior oil products cheaply. (3) Lubricating oil should be stored in a clean room and kept sealed to prevent solid particles and water from entering. Refueling tools should be dedicated and kept clean. They can be placed in the same room as lubricants. (4) Do a good job of sealing the machine oil tank to avoid dust and moisture in the air. The oil leakage of the machine should be treated in time to avoid environmental pollution and waste. Attention should be paid to not only adding oil but also not replacing it. (5) Use good oil filter element and replace it in time. Investments in filter elements can yield greater returns on equipment life.